General information Cut Pear Model Polyhedron HR1:4 MDT Expert name   Report date 21.05.2009 Real weight, ct Calculated weight, ct 71.38, 71.3869 Spread -1.92ct, -2.76 % MIC 21.551 mm Extra Facet / Nat No   Appraiser title AGS_Classic Overall cut quality N/A Symmetry appraiser title Internal Overall symmetry quality PR   Width 30.444 mm Length 25.496 mm Ratio (L/W) 0.837 Diameter Minimum 25.496 mm Diameter Maximum 30.444 mm Girdle Ratio 1.194 Total height 12.874 mm, 42.29 %

Open 3D model by a free GemAdviser Software

Parameters	Avg	Min	Max	Dev
Diameter, mm		25.496	30.444	19.41 %
Crown height, %	N/A	N/A	N/A	N/A
Crown height, mm	N/A	N/A	N/A	N/A
Pavilion depth, %	N/A	N/A	N/A	N/A
Pavilion depth, mm	N/A	N/A	N/A	N/A
Girdle, %	N/A	N/A	N/A	N/A
Girdle, mm	N/A	N/A	N/A	N/A
Table, %		45.22	49.43	4.20
Table, mm		12.602	13.768	1.166
Culet, %		0.00	0.00	0.00
Culet, mm		0.000	0.000	0.000

Girdle asymmetry   Recommendation for girdle asymmetry removing

Offset by table axis
Girdle-Culet offset by table axis	7.82 ± 0.09, %	2.380 ± 0.027, mm
Girdle-Table offset by table axis	6.74 ± 0.08, %	2.051 ± 0.024, mm
Table-Culet offset by table axis	1.74 ± 0.10, %	0.529 ± 0.031, mm

Facets slope angles   Facets azimuth angles   Facets heights   Girdle facets angles & azimuths     Girdle center Culet center Table center MIC center