|
Logitech MX Revolution mouse allows to work with MBox comfortable and increase productivity.
The mouse provide quick access to the main options: Zoom, Focus on Front Surface , Increase / Decrease Step and Speed and other.
To access all features you need to install the SetPoint software from Logitech and configure mouse as explained below.
Please use at least version 4.4 of SetPoint software. If you have older version - please download the new version from Logitech site (http://www.logitech.com/index.cfm/428/130&cl=roeu,en)
Note. Mouse control for MBox works only in microscope camera mode and you should also move the mouse into the video area.
Use the wheel to move the focus. One rotation click moves focus according the current focus step displayed in the bottom panel.
To switch focus step with the mouse in the SetPoint software assign forward and back mouse buttons with the corresponding keystrokes:
- "." (usually on the button >) - for the forward button (increase step/speed)
- "," (usually on the button <) - for the backward button (decrease step/speed)
Search button (small silver button behind the wheel) may be assigned with Ctrl-F keys to be used for the Focus on Front Surface
The side (zoom) wheel may be used for microscope zoom control.
The optimal configuration is the following: in the SetPoint software configure the side wheel as Multiple keystroke.
It is convenient to assign keys as Ctrl-Q / Ctrl-E / Ctrl-W (or visa-versa Ctrl-W / Ctrl-E / Ctrl-Q )
- Ctrl-Q = Zoom In (next fixed zoom)
- Ctrl-W = Zoom Out (next fixed zoom)
- Ctrl-E = Max/Min Zoom. First goes to Max zoom. From the Max Zoom goes to Min Zoom value.
Fixed zoom positions are the same values as zoom buttons on the bottom panel (depends on the MBox type).
There are also few more optional commands in the software:
- Ctrl-R = Max Zoom
- Ctrl-T = Min Zoom
So anyone who need quick access for example to minimal zoom may wish to use some of these extra key settings instead of suggested scheme.
Oxygen Microscope workspace
| 
